The Best 2020 WRX Subwoofers on the Market!

Are you looking for the best subwoofers to upgrade your Subaru WRX in 2020? If so, you’ve come to the right place. In this article, we’ll discuss the top subwoofer models that are ideal for the WRX and provide you with the information you need to make an informed decision. We’ll also go over a few installation tips and discuss what you should look for when choosing a subwoofer. So, let’s dive in and find the best 2020 WRX subwoofer for your car.

#PreviewProductAction
1BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifi…
2Crunch 2 Channel 1000 Watt Amp A/B Class Car Audio Stereo Amplifi…
3Pyle 6.5 Inch Mid Bass Woofer Sound Speaker System – Pro Loud Ran…
42 Channel Car Stereo Amplifier – 6,000 Watt Dual Channel Bridgeab…
5Planet Audio AC1500.1M Monoblock Car Amplifier – 1500 Watts Max P…

BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifi

Why We Loved It

  • Variable Input Gain Control – The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
  • Switchable Bass Boost – Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
  • Variable Low-Pass Crossover – Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
  • Power – 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
  • Low & High Level Inputs – A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
  • Specs – Dimensions: 9.13” x 10.44” x 2.25”, Weight: 4.43 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 102 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 1 30 Amp ATO Blade
  • Warranty – BOSS Audio Systems provides a 6 Year Platinum Online Dealer Warranty for purchases through Amazon.Com. We strongly encourage professional installation of this product to ensure proper functionality
  • Mosfet Power Supply – A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Class A/B Topology – Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Crunch 2 Channel 1000 Watt Amp a/B Class Car Audio Stereo Amplifi

Why We Loved It

  • Rubber surround and polypropylene cone provide durability, 2-inch aluminum single 4-ohm voice coil and 48-ounce magnet create deep bass
  • Amplifier boasts 2-ohms at 500 watts and 4-ohms at 250 watts with a mono bridged at 4-ohms at 1,000 watts and a max power rating of 14.40 volts
  • Features Quick Thermal Dispersion Technology which places more aluminum on the heatsink than a normal amplifier for powerful performance
  • Dual-loaded subwoofers with the enclosure are packed with 1200 watts of max power, 400 watts RMS; Dimensions enclosure (W x H): 29.69 x 14 inches
  • Set of 2-channel audio amplifier and 12-inch dual loaded subwoofer enclosure provides the perfect foundation for an unparalleled car audio system

Pyle 6.5 Inch Mid Bass Woofer Sound Speaker System – Pro Loud Ran

Why We Loved It

  • WORRY-FREE SHOPPING: With the Pyle PLG64, we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
  • LOW IMPEDANCE: The 4 ohm component audio speaker compensates the undersized wire found in many of today’s cars. It also make the most of every 300 watts peak power your car stereo can deliver with rubber magnet boot cover
  • AUTO SPEAKER SYSTEMS: Pyle GEARX series woofer is the latest series which have been designed and engineered for consistent and high performance. The 6.5 inch feature an eye-catching yellow CD P.P. cone for plenty of stiffness without added weight.Speakers maximum output power:300 watts.Impedance: 4 ohm.Power source type:Corded Electric.Speaker size:6.5 inches
  • 1.0” High Temperature – 300 Watts Peak Power
  • Aluminum Voice Coil – Mounting Depth: 2.84″
  • Yellow CD P.P. Cone – Magnet Weight: 30 Oz
  • MID BASS WOOFER: Pyle pro mid bass woofer sound speaker system has 30 oz. magnet structure and 60 Hz – 20 kHz frequency response that complete the package. It helps to provide smooth, loud and detailed sound
  • POWERFUL FEATURES: The specially treated rubber surround keeps your speakers secure and extending the life of the product. A 1” high-temperature aluminum voice coil provides the richest sound, ensuring low distortion and providing an open sound stage
  • Edge Suspension – Rubber Magnet Boot Cover
  • Specially Treated Rubber – Impedance: 4 OHM

2 Channel Car Stereo Amplifier – 6,000 Watt Dual Channel Bridgeab

Why We Loved It

  • DISTORTION-FREE: This high-powered Power Amplifier is cutting edge technology at its finest. Silver RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound
  • ADVANCED TECHNOLOGY: The professional series amplifiers are designed to incorporate DC to DC switching power supplies that provide headroom for even the most demanding peaks and dynamic ranges found in today’s audio files
  • EXCELLENT FREQUENCY RESPONSE This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own
  • RCA JACKS: The line-out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. Making it easier to connect to the first amp, then use the line out jack as the feed to the next amp
  • INTELLIGENT DESIGN: The car audio amplifier includes power and protection LED indicators; soft turn-on/off; advanced protection circuitry; variable input controls for each pair of channels; high low pass crossover controls; and aluminum heatsink

Planet Audio AC1500.1M Monoblock Car Amplifier – 1500 Watts Max P

Why We Loved It

  • power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
  • variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it
  • low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source unit. most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers
  • low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter’s frequency setting. a low-pass filter will primarily keep high notes out of your subwoofer(s)
  • high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your factory radio or aftermarket radio that does not have low-level (rca) inputs

Checklist Before Getting Your 2020 WRX Subwoofers

Picking the right 2020 WRX Subwoofers can be tricky with all of the options and misinformation out there. This guide will help you make a decision quickly and confidently so you don’t have to spend hours second-guessing yourself or breaking the bank.

Compare Prices of Similar Products

To start, take a look at the prices of similar products to get a general idea of what you can expect to pay. This will enable you to determine whether or not an offer is truly as good as it seems and avoid getting scammed by cheap knock-offs or overpriced units.

Research Reviews from Other Customers

Next, do some research into what other customers have thought about their purchases. This can help you spot any red flags or common issues with specific models so that you don’t end up wasting your money on a product that may end up breaking down quickly or not meeting your needs.

Look for Additional Warranties or After-Sales Support

Finally, be sure to check whether there are any additional warranties or after-sales support that you may be entitled to. This can help protect your purchase and ensure that you won’t have to worry about unexpected costs or having to pay for repairs down the road.

Carefully Check the Product Specs

Of course, it is also important to carefully check the product specs before making a purchase. This can you get a better sense of what to expect from your unit, whether it will meet all of your particular needs, and how long it is likely to last.

How Much Are They Charging for Shipping?

Make sure to look into the company’s shipping policies before checking out. This can help you determine whether or not they are charging a fair price for shipping and avoid any unexpected surprises at checkout.

Don’t Fall Victim to Scams and Fraud

Take caution against getting scammed. Young users, in particular, worry about fraudsters and their various schemes to access your personal information, such as usernames and passwords. While there are many trustworthy websites out there, some dishonest ones try to pass themselves off as online shopping stores in order to get information from you.

But how can you tell if a website is fake? Google Trusted Stores is a verification system for all online shopping sites that let users know which shop they can trust with their business.

Frequently Asked Questions

1. What are the best 2020 WRX subwoofer models available?

The best 2020 WRX subwoofer models available are the Rockford Fosgate P3D4-12, the JL Audio 10TW3-D4, and the Alpine SWR-T12.

2. What is the best subwoofer size for the 2020 WRX?

There is no single “best” subwoofer size for the 2020 WRX. The size of the subwoofer that should be used depends on the size of the vehicle, the type of sound desired, and the space available to install the subwoofer. Generally, a 10-inch subwoofer is a good place to start for a vehicle like the WRX, but it may be necessary to size up or down depending on the other factors.

3. What type of subwoofer enclosure works best with the 2020 WRX?

The best type of subwoofer enclosure for the 2020 WRX would be a sealed box. Sealed boxes are ideal for cars with limited space, as they are smaller and more compact than ported boxes. Sealed boxes also provide tight, accurate bass reproduction that is perfect for the WRX’s small cabin space.

4. What is the power handling rating for the best 2020 WRX subwoofers?

The power handling rating for the best 2020 WRX subwoofers varies depending on the specific model. Generally, the power handling range for the 2020 WRX subwoofers is between 500 and 1500 watts RMS.

5. Are there any special installation considerations for installing a subwoofer in a 2020 WRX?

Yes, there are special installation considerations for installing a subwoofer in a 2020 WRX. Depending on the type of subwoofer and the installation location, additional hardware may be required, such as a mounting bracket, and the audio system may need to be modified. Additionally, the wiring and connections must be properly installed to ensure the best possible sound quality.

Leave a Comment