How Much Horsepower Does a Camshaft Add

How Much Horsepower Does a Camshaft Add 1

There’s no definitive answer to how much horsepower a camshaft can add, as it depends on factors like the engine’s displacement, compression ratio, and other modifications. However, in general, a performance camshaft can add around 10-20% more horsepower than a stock camshaft. If you’re looking to get more power out of your engine, installing a performance camshaft is one of the best ways to do it.

How Much Horsepower do Cams Make?

A camshaft is a rotating shaft with lobes that open and close the intake and exhaust valves of an internal combustion engine. Cams can be used to increase horsepower by opening and closing the valves at different times, which allows more air and fuel to enter the cylinders. However, adding a camshaft will not add much horsepower on its own; it must be paired with other modifications such as larger valves, porting, and higher-lift rockers.

How Much Horsepower Does a Camshaft Add

Credit: mycarmakesnoise.com

How Much Horsepower Does a Camshaft Add

A camshaft is a rotating shaft with cams that act as levers to open and close valves. It converts the reciprocating motion of the pistons into the rotating motion of the crankshaft. The camshaft also provides a place to mount other engine components such as followers, rocker arms, and valve actuators.

In an overhead valve (OHV) engine, the camshaft is located in the cylinder head above the combustion chamber. In an overhead cam (OHC) engine, it is located in the block next to or behind the combustion chamber. While a typical stock production engine might have between 100 and 200 horsepower, adding a camshaft can increase that number by 20 to 50 percent or more—depending on several factors such as Compression ratio Engine displacement Cam duration Valve lift Static compression ratio Number of cylinders RPM range And others

Some aftermarket companies claim their cams can add even more power but be aware that most of these claims are exaggerated. A well-designed performance cam will usually provide 5 to 20 percent HP gain over a stock cam when used with appropriate supporting modifications such as higher flowing intake and exhaust systems, increased compression ratios, and headers.

What are the Benefits of Adding a Camshaft

A camshaft is a rotating shaft with cams that act on the valves of internal combustion engines. The camshaft rotates at half the speed of the crankshaft, and its position in the engine is generally fixed. Cams open and close intake and exhaust valves during each cylinder’s intake and exhaust strokes.

The main benefit of adding a camshaft to an engine is increased power output. The cams can be designed to open and close the valves at different times during the engine cycle, which allows for more air and fuel to enter the cylinders. This results in more power being generated by the engine.

Another benefit of adding a camshaft is improved fuel economy. By carefully designing the timing of when the intake and exhaust valves open and close, it’s possible to reduce pumping losses within the engine. This means that less fuel is needed to produce a given amount of power, leading to better fuel economy overall.

Finally, adding a camshaft can also lead to reduced emissions from an engine. By opening and closing the valves at specific times during the cycle, it’s possible to improve combustion within the cylinders.

How Do I Choose the Right Camshaft for My Engine

There are a few things to consider when choosing a camshaft for your engine. The first is what you will be using the engine for. If you are building a performance engine, then you will want a camshaft that is designed for high lift and duration.

If you are just looking for an upgrade from your stock camshaft, then you can choose one with slightly less lift and duration. The next thing to consider is the valvetrain in your engine. If you have stock valves and springs, then you will want to stay within the recommended lift range for those components.

If you have aftermarket valves and springs, then you can go with a higher lift camshaft. Just be sure to check the clearance between the valves and pistons at full lift to avoid any interference issues. Finally, you’ll need to decide on an intake and exhaust duration that matches your application.

For most street engines, somewhere around 210-220 degrees of intake duration is ideal. Exhaust duration can be shorter or longer depending on what kind of power curve you’re looking for. Once again, it’s important to check clearance with the pistons at full lift when choosing your camshafts to avoid any interference issues.

Conclusion

A camshaft is a shaft to which cams are attached. The cams open and close the intake and exhaust valves in an engine, timing the opening and closing of the valves with respect to the position of the piston in the cylinder. A typical V8 engine will have eight intake and eight exhaust valves, for a total of sixteen valves.

Cams can be designed to produce more power by opening and closing the valves at different times during the engine cycle. How much horsepower does a camshaft add? It depends on what kind of camshaft you install, and how much work you’re willing to do to your engine.

A well-designed performance cam can add anywhere from 5 to 20 hp on a naturally aspirated engine, and even more on a forced induction or nitrous oxide-assisted engine. If you’re just looking for a little bit more power, though, you can probably get away with just bolting on a new set of heads with bigger ports and valves.

Please follow and like us:
How Much Horsepower Does a Camshaft Add 4
Pin Share

Leave a Reply

Your email address will not be published.

Pinterest
LinkedIn
Share
Instagram