How to Fix a Blown Speaker

How to Fix a Blown Speaker 1

If you’re a music lover, there’s nothing worse than a blown speaker. Whether it’s your car stereo or your home theater system, a blown speaker can ruin your listening experience. But don’t despair – in most cases, a blown speaker can be fixed.

Before you start working on your speakers, it’s important to understand what caused the problem in the first place. In many cases, a blown speaker is simply the result of too much power being sent to the speaker. This can happen if you turn up the volume too high or if you connect an amplifier that’s too powerful for the speakers.

In other cases, a blown speaker may be caused by physical damage, such as someone accidentally dropping or stepping on the speaker. Once you’ve determined the cause of the problem, you can start working on fixing your blown speaker. If the problem is too much power being sent to the speaker, you’ll need to reduce the volume or get a new amplifier that’s better matched for your speakers.

If physical damage is to blame, you’ll need to replace any damaged parts before using the speaker again.

How to Repair a Blown Speaker

  • Unplug the speaker from the power source
  • Inspect the speaker for any visible damage
  • Check the speaker wire for any fraying or breaks
  • Replace the blown speaker with a new one
  • Reconnect the speaker to the power source and test it out
How to Fix a Blown Speaker


How Do You Fix a Blown Speaker

If you’re a music lover, then you know how important it is to have good speakers. But what happens when one of your speakers blows? Is it time to throw them out and buy new ones?

Or is there a way to fix them? Here’s the thing: most blown speakers can be fixed. It might take a little bit of work, but it’s definitely worth it to try and save your beloved speakers.

So, how do you fix a blown speaker? The first step is to identify the problem. There are two main reasons why speakers blow: either the voice coil has burned out or the cone has been damaged.

If you can see that the voice coil is burned out (it will look blackened), then you’ll need to replace it. This is not an easy task, so unless you’re confident in your soldering skills, you might want to take your speaker to a professional. If the cone is damaged, then it’s usually because something has hit it and caused a dent or hole.

In this case, you’ll need to patch up the damage with some sort of sealant or adhesive. Again, unless you’re confident in your DIY skills, we recommend taking your speaker to a professional for this repair. Once you’ve identified the problem and made the necessary repairs, it’s time to test out your speaker!

Plug it into an amp or stereo and turn up the volume. If all goes well, then congrats – you’ve successfully fixed your blown speaker!


If you have a blown speaker, there are a few things you can do to fix it. First, check the speaker wire to see if it is loose or has come disconnected. If so, simply reattach it and see if that fixes the problem.

If not, you may need to replace the speaker wire entirely. Another possible issue is that the speaker itself may be damaged. In this case, you will need to replace the speaker.

Finally, if neither of these solutions works, the issue may be with your amplifier or receiver. In this case, you will need to take your unit to a professional for repair or replacement.

Please follow and like us:
How to Fix a Blown Speaker 4
Pin Share

Leave a Reply

Your email address will not be published.