How to Pull a Gooseneck Trailer With a Bumper Hitch

How to Pull a Gooseneck Trailer With a Bumper Hitch 1

If you need to haul a gooseneck trailer but only have a bumper hitch, don’t worry – it can be done! Here’s how: First, attach the gooseneck coupler to the ball mount on your hitch. If your hitch has a rise or drop, make sure the coupler is level with the ground.

Next, insert the safety chains through the holes in the coupler and secure them to your tow vehicle. Finally, connect the electrical wiring from your trailer to your tow vehicle. Once everything is hooked up, you’re ready to hit the road!

How to convert bumper pull to gooseneck hitch

  • Select a gooseneck trailer that is the appropriate size for the vehicle you will be using to tow it
  • Read the owner’s manual for your vehicle to determine the maximum weight capacity of your bumper hitch, as well as any other restrictions that may apply to towing a gooseneck trailer
  • Position the gooseneck trailer so that the coupler is lined up with the ball on your bumper hitch
  • Once positioned, lower down the trailer until the coupler is seated onto the ball
  • Secure the gooseneck trailer to your vehicle by attaching the safety chains and/or electrical wiring harness, as required by law in your jurisdiction
  • Test all lights on both your vehicle and the gooseneck trailer to ensure they are working properly before setting out on your trip
  • Set brakes on both your vehicle and on the gooseneck trailer according to manufacturer’s instructions before starting to drive
  • Slowly back up while keeping an eye on positioning of both vehicles until they are fully coupled together
How to Pull a Gooseneck Trailer With a Bumper Hitch


What are the Benefits of Pulling a Gooseneck Trailer With a Bumper Hitch

There are many benefits to pulling a gooseneck trailer with a bumper hitch. One of the main benefits is that it helps to distribute the weight of the trailer more evenly, which can help to prevent damage to your vehicle’s suspension. Additionally, this type of hitch provides better stability and control when making turns or backing up, which can be helpful when hauling large or heavy loads.

Finally, using a gooseneck trailer with a bumper hitch can also help to reduce wear and tear on your vehicle’s tires by keeping them from having to bear as much of the trailer’s weight.

How Do You Properly Attach a Gooseneck Trailer to a Bumper Hitch

Most gooseneck trailers have a ball coupler that attaches to a special hitch mounted in the bed of a pickup truck. The hitch consists of a large, square plate with four holes for mounting bolts, and a 2-5/16” trailer ball mounted in the center. To attach the trailer, line up the square plate on the hitch so that the holes line up.

Then, take the safety chains and loop them around the frame of the truck and through the corresponding holes in the hitch plate. Finally, insert the pin through all four holes to secure everything in place. Now it’s time to connect the electrical harness.

Most gooseneck trailers have seven-way plugs, which correspond to seven different functions: brakes, tail lights, turn signals, side marker lights, reverse lights, electric brakes and an auxiliary power supply. To connect these properly, first locate your vehicle’s seven-way plug (it should be near where your taillights are). If your vehicle doesn’t have a seven-way plug installed already, you can get one at most auto parts stores or online retailers that sell RV supplies.

Once you have located or installed your seven-way plug, match up each wire on the trailer’s plug to its corresponding color wire on your vehicle’s plug. crimp or soldered each connection and then use electrical tape or heat shrink tubing to seal everything off so moisture cannot get in and cause corrosion. Assuming your gooseneck trailer has air brakes (as opposed to electric brakes), there will be an air hose running from the back of the trailer down to where it can connect with an air source on your tow vehicle.

Most likely this will be via quick connect coupling attached to an existing air line on your truck – if not already present on your truck you will need install one before connecting anything else up!

What are Some Tips for Making It Easier to Pull a Gooseneck Trailer With a Bumper Hitch

If you’re having difficulty pulling a gooseneck trailer with a bumper hitch, there are several things you can do to make it easier. First, make sure the hitch is properly secured to the tow vehicle. Next, check that the trailer’s tires are inflated to the proper pressure.

Finally, adjust the trailer’s coupler so that it’s level with the ground. By following these tips, you should be able to successfully tow your gooseneck trailer.


Are you wondering how to go about pulling a gooseneck trailer with a bumper hitch? If so, then read on for some helpful tips. For starters, it’s important to make sure that your vehicle is properly equipped with the right type of hitch.

Next, you’ll need to attach the gooseneck trailer to the hitch and secure it in place. Finally, when you’re ready to hit the road, be sure to take things slow and easy at first until you get a feel for how your rig handles. With these simple tips in mind, there’s no reason why you can’t safely and successfully pull a gooseneck trailer with a bumper hitch.

Please follow and like us:
How to Pull a Gooseneck Trailer With a Bumper Hitch 4
Pin Share

Leave a Reply

Your email address will not be published.