How to Reset Parking Brake Light

How to Reset Parking Brake Light 1

The parking brake light is an important indicator in your car. It tells you when the parking brake is engaged and when it’s safe to release it. If the light is on, it means the parking brake is still engaged.

If the light is off, it means the parking brake has been released and it’s safe to drive. Sometimes, the parking brake light will stay on even after you’ve disengaged the parking brake. This can be annoying and may cause you to worry that something is wrong with your car.

Fortunately, there’s an easy way to reset the parking brake light.


  • Park your vehicle on a flat surface and turn the ignition to the “on” position without starting the engine
  • Depress the brake pedal and hold it down while you shift the gear selector into each gear position, ending in park
  • Release the brake pedal and check to see if the parking brake light has gone off
  • If not, repeat steps 2-3 until the light goes off
How to Reset Parking Brake Light


How Do I Reset My Parking Brake Light

If your parking brake light is on, it means that your parking brake is engaged. To reset the light, you’ll need to disengage the parking brake. Start by putting your car in neutral and pulling the parking brake lever up until you feel resistance.

Then, push the lever down slowly until you hear a click. This will release the parking brake and should reset the light.

What Could Be Causing My Parking Brake Light to Stay on

If your parking brake light is staying on, there are a few things that could be causing the issue. One possibility is that the parking brake cable is stuck or not releasing properly. Another possibility is that there is a problem with the parking brake itself, such as a broken spring or seized caliper.

If you suspect that either of these issues may be the cause of your parking brake light staying on, it’s best to have it checked out by a professional mechanic who can diagnose and fix the problem.

How Do I Know If My Parking Brake is Fully Released

When you press the brake pedal in your car, the parking brake is fully released if the pedal feels firm and doesn’t sink to the floor. If the pedal sinks to the floor, this indicates that there is still some tension on the parking brake and it’s not completely released.


If the parking brake light on your car is illuminated, it means that the brakes are engaged. To reset the light, you’ll need to first release the parking brake by pulling up on the lever. Next, start the car and press down on the brake pedal to disengage the brakes.

Finally, turn off the engine and re-engage the parking brake before exiting the vehicle.

Please follow and like us:
How to Reset Parking Brake Light 4
Pin Share

Leave a Reply

Your email address will not be published.