How To Wash Cycling Cloths: Let’s Find Out The More Effective Method

Cycling clothes, just like every other garment, get dirty every quite often. They, therefore, have to be cleaned and maintained in the best ever conditions. There are two main ways of doing so. These are the use of bare hands and machines respectively.

We are going to examine these two major options in details. We will thereafter identify and recommend to you the better of the two options. We hope this shall give you the necessary guidance to go about this issue well.

A. By Hand

This is pretty straightforward. It basically entails the use of bare hands, soap, basin, and water to get rid of dirt from the cycling garments. To use this technique, follow the procedures outlined below.

Tools and Materials Required

  • Soap
  • Water
  • Basin
  • Clothe lines
  • Pegs
  • Scrubbing brush
  • Iron

Step I: Choose the Appropriate Detergents

Star out by selecting the appropriate detergents. Check the labels of the clothes to determine which detergent suits your clothes. Check out for other parameters as well. These include water temperature, duration of washing, and other vital indicators.

This procedure is very vital in that you may normally make some mistakes which in turn can destroy the garment. Also, using the wrong methods or detergents may also reduce the lifespan of the garment as a whole.

Step II: Fill the Basin with Water

Now fill the basin with water. Be sure the water is of the right temperature and quantity. If the garment lacks any recommended water temperature, settle for lukewarm water. This is because such water goes along well with many kinds of fabrics and materials.

Proceed thereafter to sprinkle some detergents in the water. The best detergent is the washing powder. However, the liquid and bar soap can also be appropriate. Take care once more to see to it that the detergent of choice is suited for the fabric you are washing.

Step III: Soak the Clothes

Place the garment in the basin and submerge it thereafter. Move the garments gently out and about to ensure that they are completely submerged in the water. Once the garment is wholly submerged in the water and detergent, leave it to soak for some time.

You are advised to do so overnight as this will give the detergent enough time to confront all the dirt. This will also minimize the effort you will have to put in to get rid of the dirt from the garment later.

Step IV: Scrub or Wring the Clothes

Scrub or wring the clothes to remove the dirt from the fabrics. The choice of the right method depends on the strength of the fabric and the intensity of the dirt. Be gentle yet gentle while undertaking these two. This is because you might end up tearing the fabric apart instead of ridding them of dirt.

Step V: Rinse and Dry

Finish off by rinsing the garment. Do this by placing the garment in clean water separately. Leave the garment in this clean water for some time. Wring gently to remove the detergents and extra dirt. Depending on how dirty the garment is, you may have to repeat this step severally. Proceed to dry the garment on a clothesline. Hang it with pegs for faster drying.

 You should, therefore, give it a higher priority while searching for the most appropriate method to wash your clothes. It is also worth noting that there are other methods other than these two that may yield the same degrees of satisfaction. Look out for them as well.

Recommended Article : 50cc Scooter Review

B. By Machine

This one differs markedly from the use of bare hands. It entails the use of the washing machines to carry out the task of washing the cyclist clothes. It requires fewer items and tools when compared to the bare hands above. The following procedures will help you get started.

Tools and Materials Required

  • Detergent
  • Watert
  • Iron

Step I: Place the Dirty Clothes in the Drum

Start by shaking the clothes vigorously to eliminate the dust and other loose debris from the garment. Proceed thereafter to place the dirty cyclist clothes in the drum of your washing machine. Do not suffocate your machine as this may interfere with its washing actions and operations. Stick to the manufacturer’s recommended weight capacity. Do not also mix the bloating clothes with non-bloating ones –for obvious reasons of course!

Step II: Add the Appropriate Detergents and Water

Pour water into the drum and follow it by adding the appropriate detergent. You have to be moderate in both undertakings. Too much water might compromise the functioning of the machine and interfere with the final outcomes. The same case applies to the detergents. Choose a milder detergent preferably the one that is recommended by the manufacturer of the garment.

Step III: Set the Right Parameters

This is by far the most significant step in the entire process. This is the step that makes or breaks the situation. These parameters include a temperature of the water, wash cycles, spinning, duration of washing, and fabrics to be handled.

Read the manufacturer’s labels carefully to get to know these parameters. Combine this with the care labels of the fabric that make up the cyclist clothes. This way, you will less likely go wrong.

Step IV: Wash and Rinse

Switch on the machine and let it do the rest. Some machines have timers that alert you at the conclusion of the washing period. Others will want you to be on standby and monitor the washing yourself. Either way, you will have to come back to the machine another time to get your garment out.

Step V: Dry

Some washing machines can dry the clothes over and above merely washing them. Others can only wash. If yours is the former, simply activate the dryer and let it get rid of the moisture content of the garment. If yours is the latter, you may have to dry the garment on clothes lines the normal way.

Closing Remark

The verdict is clear! Washing the cycling clothes by machines is the better of the options. This stems from a combination of factors. Among these are the need for limited tools and materials, the use of comparatively less effort, and the faster operational actions.

Leave a Comment:

1 comment
Add Your Reply