What is the Biggest Cam for Stock 350

There are many different opinions on what the biggest cam for stock 350 is. Some say that it is the Lunati Voodoo 60102, while others believe it to be the Comp Cams Xtreme Energy 574S. The truth is, there really is no one definitive answer.

It all depends on your individual engine and what you are looking for in terms of performance. If you are simply looking for a mild increase in power, then either of these cams would likely be a good choice. However, if you are looking to build a high-performance engine, then you may want to consider other options.

Big cam Chevy 350 first start!

The 350 engine is a small block V8 engine that was introduced in 1967. It was designed as a replacement for the 327 engine. The 350 engine is one of the most popular engines ever made, and it has been used in a wide variety of vehicles over the years.

The biggest cam for stock 350 engines is the ZZ4 camshaft. This camshaft is designed for high performance applications. It has a lift of 0.474 inches and a duration of 230 degrees.

It is a very aggressive camshaft and it will not work well with stock valve springs. If you are looking for more power from your 350 engine, then this is the camshaft to get.

What is the Biggest Cam for Stock 350

Credit: www.manorracing.com

What is the Biggest Cam for Stock 350

The 350 Chevy engine is a small block V8 with a 4-inch bore and 3.48-inch stroke. The largest cam that can be used with the stock pistons and connecting rods is a mild performance grind with .480-.490″ lift and duration in the 210°-220° range at .050″ tappet lift.


The blog post discusses the biggest cam for a stock 350 engine. It states that the cam should be big enough to make the engine work harder, but not so big that it causes problems. It also says that the cam should be selected based on the intended use of the engine.

Leave a Reply

Your email address will not be published.

Related Post